GENERAL DESCRIPTION
Definition
Interior stain blocking matt solvent based paint for the renovation of ceilings and walls with inbuilt protection against mould.
Binder
Special polymerised resin based binder.
Properties
• Reversible coating (convertible)
• Good water vapour permeability
• Zero tension
• Rapid hardening
• Totally flat matt finish
• Very good mechanical resistance
• Excellent stain covering properties against
nicotine, dried water and soot
• Non-yellowing properties.
Area of application
Classidur Tradition is widely used in historic buildings including
churches. Classidur Tradition has all the characteristics of the Classidur
range, with the addition of very high resistance to the proliferation of mould.
Because of its specific characteristics, Classidur Tradition can be applied
with no primer or undercoat on dry and coherent substrates which are free
of mould, such as plaster, concrete and mortar, as well as surfaces stained
with nicotine, dried water or soot.
Classidur Tradition can be used, for example in :
- food preparation areas
- breweries
- slaughter houses
- butchers
- canning factories
- basements
- cold stores
- industrial kitchens
- abattoir
- refectories
- school buildings
- changing rooms etc.
- churches
CHARACTERISTICS ON DELIVERY
Colour : white
Odour : low
Shelf life (20°C) : at least 12 months in tightly closed containers.
Never skins over.
Packaging : 12,5 l
VOC: 2004/42/CE A/g 350 g/l (2010) max. 350 g/l
RESULTS OF MEASUREMENTS
Appearance : totally matt
Density : 1,39 (average)
Solids : 63 % (average)
Drying time :
- «Dust dry» after about 1 hour
- Touch dry after about 2 hours
- Totally dry and hard after 24 hours
Abrasion resistance :
Abrasion resistance moist class 2 subject to EN 13.300
APPLICATION
State of the substrate
The substrate must be sound, clean, dry and free from mould. Treat
beforehand supports containing molds with an appropriate product.
Method of application
Brush, roller (medium length pile synthetic roller).
Dilution
If nessersary, it is strongly recomended to be diluted with odourless
classidur Diluent (Use only in well-ventilated areas).
Cleaning of tools
With Classidur Diluent or white-spirit.
Consumption
140-160 g/m2
Practical Coverage
approximately 9-11 m2/litre. These values are average and can alter
according to the absorption capacity of the substrate.
Application system
For optimum mould growth resistance, two coats of classidur tradition
must be applied.
Remarks
• Good air circulation is recommended during application,
• Foodstuffs which are not in closed containers must be removed during
application and for a period of 24 hours thereafter,
• In cases where the substrate is soiled with mould, clean them beforhand.
